Produse pentru magazine în (613)

This stainless steel roof hook for plain tile roofing should always be installed with the appropriate sheet metal tile. Due to the low load-bearing capacity of this type of tile and the long roof hook bracket, this prevents tile breakage and water damage. ITEM NUMBER:MO-649

The EPP solar modules consist of solar cells with high efficiency, and a series of quality performance tests according to the strict quality standard are carried out during production to allow the solar modules to function normally in harsh environmental conditions and to ensure the maximum output power from the module when generating electricity. ITEM NUMBER:EPP-400W-FB

Deye 10kw hybrid inverter, suitable for residential and light commercial use, maximizes self-consumption of solar energy and increases your energy dependency. During the day, the PV system generates electricity, which is initially made available to consumers. Then the excess energy charges the battery via Deye 6kw inverter. Finally, the stored energy can be released when consumers need it. The battery can also be charged via the diesel generator to ensure an uninterrupted supply in the event of a power failure ITEM NUMBER:EPP-DY-HBD-10

With the GoodWe Lynx Home U and the hybrid inverter of the EM series, GoodWe presents an all-in-one system from its own hand. Both the battery and the hybrid inverter are capable of emergency power ITEM NUMBER:MO-7126

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-3306

The highlights at a glance Manufacturer: Alumero Manufacturer item no.: 9159990 Article No.: MO-534 Stück is VPE: 100 is Carton ITEM NUMBER:MO-534

Epp 450 Watt M6 Hieff Twin Mono Black Frame Solar Panel The EPP solar modules consist of solar cells with high efficiency, and a series of quality performance tests according to the strict quality standard are carried out during production to allow the solar modules to function normally in harsh environmental conditions and to ensure the maximum output power from the module when generating electricitys Item number:EPP-450W-B

Intelligent micro-inverter for feeding into your home network. EPP inverter is easy to set up and configure. Ideal for small solar systems, for example on balconies, garden houses, garages or shaded areas. EPP 600W features two MPPTs that ensure each PV module can achieve the highest power generation. ITEM NUMBER:EPP-600

It is not for nothing that roof structures are referred to as interference surfaces in the PV industry. They make module assignment more difficult and, in the worst case, create shading. When it comes to exhaust ducts, the Marzari flat fan offers the simple and efficient solution to solve all problems and keep the exhaust fan functioning. ITEM NUMBER:MO-4352

Intelligent micro-inverter for feeding into your home network. Deye inverters are easy to set up and configure. Ideal for small solar systems, e.g. on balconies, summer houses, garages. Deye 800W has two MPPTs that ensure each PV module can achieve the highest power generation. ITEM NUMBER:EPP-DEYE-800

The mounting systems from EPP SOLAR are quick to assemble, robust and durable. Not only are they cost effective, they are equally suitable for new, existing and renovated roofs. EPP SOLAR offers photovoltaic mounting systems for both pitched and flat roofs. A major advantage is that the mounting systems can withstand heavy snow loads. ITEM NUMBER:EPP-MTG-ZD-H-V-1

Connection cable for selfPV 15 x1.0mm² rubber cable 230V cable flexible on one side with 3-pin plug. It can be easily connected anywhere. This is a high quality round cable for connecting and also protecting from mains electricity through a socket, e.g. washing machines, refrigerators, heaters, computer accessories, extension cords, etc. ITEM NUMBER:EPP-KBL-ANS-15

This flat rate for the proven Alumero substructure for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order ITEM NUMBER:MO-2882

The VARTA emergency power box enables consumers to be installed quickly and easily for the VARTA element S5 backup systems. The emergency power box is optional and up to 3 consumers can be plugged in, which continue to work even in the event of a power failure. ITEM NUMBER:MO-6951

The EPP solar modules consist of solar cells with high efficiency, and a series of quality performance tests according to the strict quality standard are carried out during production to allow the solar modules to function normally in harsh environmental conditions and to ensure the maximum output power from the module when generating electricity ITEM NUMBER:EPP-380W-B-QTYX20

The Hoymiles HM-800W is the perfect micro-inverter for your balcony power station. The compact lightweight (only 3kg including the AC cable) is suitable for solar power production with up to two solar panels. Like all other Hoymiles microinverters, it is suitable for long operating times and wide use of PV panels, since its start-up value is very low (only 22V) and the DC input range of operating voltage (16-60V) is extremely wide. ITEM NUMBER:HM-800

The base rail for the D-Dome 6.10 system from K2 is suitable for flat roofs with an east-west elevation. It is made of aluminum and is 2.25 meters long. The base rail set is delivered pre-assembled including end plate, dome SD and mat. ITEM NUMBER:MO-6237

The Hoymiles HM-600W is the perfect microinverter for your balcony power station. The compact lightweight (only 3kg including the AC cable) is suitable for solar power production with up to two solar panels. Just like all other Hoymiles microinverters, it is suitable for long hours of operation and wide PV module application because its startup is very low (only 22V) and the DC input range of operating voltage (16-60V) is extremely wide ITEM NUMBER:HM-600

EPP Solar is committed to a sustainable future and offers electrical solutions for new and existing applications.Monocrystalline solar cells are characterized by their high quality and the high efficiency they can achieve. They are produced in a complex manufacturing process. The advantages: their long service life, their robustness, their low susceptibility to external influences and their simple installation ITEM NUMBER:EPP-380W-SB-QTYX2

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.s ITEM NUMBER:EPP-HYB-ST-12

Simple single fuse holders for each of the above fuse types. A 6-way fuse holder, MEGA fuses only. Modular single fuse holders, for MEGA fuses only. With an optional busbar accessory to efficiently connect multiple fuses together ITEM NUMBER:CIP000100001

The EPP solar modules consist of solar cells with high efficiency, and a series of quality performance tests according to the strict quality standard are carried out during production to allow the solar modules to function normally in harsh environmental conditions and to ensure the maximum output power from the module when generating electricity ITEM NUMBER:EPP-400W-FB-QTYX6

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the functions of the MultiPlus and also has the option of an external current transformer in order to implement the PowerControl and PowerAssist functions or to optimize self-consumption with external current measurement. ITEM NUMBER:PMP482505010

The classic end clamp for modules with a frame height of 32 mm. Completely pre-assembled with a suitable stainless steel screw and threaded plate including screw lock. ITEM NUMBER:MO-1210

Einkaufswagenchips aus Spritzguss (Metall-Legierung) 1- oder 2-seitige Werbefläche aus Spritzguss mit ausgesparten Teilbereichen. Die tiefliegenden Bereiche können mit Weich- oder Hartemaille ausgelegt werden. Die Einkaufswagenchips werden mit Standard-Karabiner geliefert. Auch andere Halter-Modelle sind möglich.Die Lieferung ohne Halter ist ebenfalls möglich. Unsere Einkaufswagenchips entsprechen der europäischen Münz- und Medaillenverordnung. Mindestmenge: 300 Stück Verfahren:Spritzguss mit ausgesparten Teilbereichen Material:2 mm Spritzguss Größe:23,2 mm Durchmesser Plattierung:vergoldet Halterung:Sonderhalter Modell „SOH-02“, matt

Baumwolltaschen mit Druck. Größe: 38x42cm

Gefertigt aus Spritzguss. Exklusiver Einkaufswagenauslöser. Einseitig geprägt und 1-farbig emailliert in Hartemaille, besetzt mit 128 Strasssteinchen in aufwendiger Handarbeit.

Einkaufswagenchips bedruckt 1- oder 2-seitig bedruckt. Ihr Motiv wird im Offset- oder im Siebdruck auf den Träger aufgebracht. Die Einkaufswagenchips werden mit Standard-Karabiner geliefert. Auch andere Halter-Modelle sind möglich. Die Lieferung ohne Halter ist ebenfalls möglich. Unsere Einkaufswagenchips entsprechen der europäischen Münz- und Medaillenverordnung. Mindestmenge: 300 Stück Verfahren:Siebdruck auf eingelegtes Aluminiumplättchen Motiv auf 2 Seiten Material:1,6 mm Metallguss Größe:23,2 mm Durchmesser Plattierung:Silberfarben vernickelt Halterung:Sonderhalter Modell „SOH-01“, matt

Variety Red Cherry Kush EU certified industrial hemp Flavor Fruity Natural and without artficial terpenes Cultivation method Outdoor / Greenhouse Made in Switzerland CBD 35% THC <0,2 Country of origin:Switzerland Minimum Decrease:0,5 kg Units:available in: 0,5kg up to 5 kg Bulk package or 2g Cáñamo branded packages

Einkaufswagenchips aus Spritzguss (Metall-Legierung) 1- oder 2-seitige Werbefläche aus Spritzguss mit ausgesparten Teilbereichen. Die tiefliegenden Bereiche können mit Weich- oder Hartemaille ausgelegt werden. Die Einkaufswagenchips werden mit Standard-Karabiner geliefert. Auch andere Halter-Modelle sind möglich. Die Lieferung ohne Halter ist ebenfalls möglich. Unsere Einkaufswagenchips entsprechen der europäischen Münz- und Medaillenverordnung. Mindestmenge: 300 Stück Verfahren:Spritzguss mit ausgesparten Teilbereichen Material:2 mm Spritzguss Größe:23,2 mm Durchmesser Plattierung:silberfarben vernickelt Halterung:Chiphalter J-009, matt